Default sorting

Dongcheng Power Tools in Pakistan: Power Meets Performance

 

Grinders, rotary hammers, sanders, metal shears and a wall chaser cover fabrication, drilling and finishing. A petrol generator and petrol water pumps cover sites without reliable power or water. Pressure washers handle the cleaning. That is a lot of everyday work from one brand.

One brand also means fewer suppliers to chase when a tool needs service.

Dongcheng Tools in Pakistan: The Full Lineup

Everything below is on the listing right now. Confirm the price on the product page before you order.

Angle Grinders (4 Inch to 9 Inch) and Die Grinders

Model Size Price
DSM03-100A 4 inch Rs. 7,250
DSM04-100B 4 inch Rs. 7,250
DSM02-115 4.5 inch Rs. 7,800
DSM04-125 5 inch Rs. 15,000
DSM05-125 5 inch Rs. 16,600
DSM03-150 6 inch Rs. 19,000
DSM06-230 9 inch Rs. 30,400
DSM230SH 9 inch Rs. 30,900

The 110V-DSM150A angle grinder is Rs. 30,200. Read the voltage note further down before you order it.

For tight finishing work there are two 1-inch die grinders, both listed at 3.5AMP: the DSM03-25 at Rs. 7,200 and the DSJ02-25 at Rs. 8,500.

Sanders, Shears, Wall Chaser and Drill

For surface prep, the DSA125 random orbital sander (300W, 125mm pad) is Rs. 13,200. There are also two belt sanders: the DST533 (550W, 30×533mm belt) at Rs. 21,000 and the DST610 (1200W, 100×610mm belt) at Rs. 28,700.

Sheet metal has two options. The DJJ25 710W electric metal shear is Rs. 22,500. The DJH32 620W punch-type electric metal shear is Rs. 32,100.

The DZR110 wall chaser (1600W, 110mm) is Rs. 25,500, and the DCJZ14-10 12V angle driver drill is Rs. 38,300.

Pressure Washers, Generator and Water Pumps

The DQW5.5/10 is a 1600W pressure washer rated at 100 bar, priced at Rs. 36,900. The DQW8/7 is also 1600W, but it is the commercial washer: 70 bar, Rs. 95,400. The DPWG3.0 1800W high pressure sprayer, rated at 3000 PSI, is Rs. 149,000.

For power and water on site, the DF3600 2800W petrol generator (212cc) is Rs. 140,900. The 4.0kW petrol water pumps (212cc) are the DQGZ50 at Rs. 65,300 and the DQGZ80 at Rs. 72,400.

Choosing a Dongcheng Angle Grinder: 4 Inch, 6 Inch or 9 Inch

Match the disc to the job. Four to five inch for everyday work. Nine inch for heavy cutting and grinding.

4 inch or 6 inch? The 4 inch grinders (DSM03-100A and DSM04-100B, Rs. 7,250 each) are light and easy to handle. The 4.5 inch DSM02-115 sits just above them at Rs. 7,800, so all three 4 and 4.5 inch models are under Rs. 8,000. The 6 inch DSM03-150 (Rs. 19,000) gives you more reach for heavier jobs. A 5 inch is a solid all-round pick for a workshop. The two 9 inch grinders, the DSM06-230 and DSM230SH, are for contractors who cut and grind thick material regularly. They are heavy to hold for long periods.

Disc size does not set the whole price. The 4.5 inch DSM02-115 is Rs. 7,800, while the 5 inch DSM04-125 is Rs. 15,000. Compare power ratings and specifications on each product page, not just the disc size.

Use discs rated for the grinder’s speed. Keep the guard on. Wear eye protection.

Dongcheng Rotary Hammers for Concrete and Masonry

A rotary hammer drills into concrete, brick and stone, which an ordinary drill struggles with. These are the Dongcheng rotary hammers to list here:

Model Max drilling capacity Power Impact energy
DZC02-20 20mm 500W 2.0J
DZC02-26 26mm 750W 2.0J
DZC05-26B 26mm 800W 2.8J

Before you pick one, look at three numbers: maximum drilling capacity (the hole size you need), impact energy in joules (how hard it hits) and the chuck type. Most general-purpose rotary hammers use an SDS-Plus chuck.

Before You Buy a Generator, Water Pump or Pressure Washer

Size the machine for your busiest day, not an average one. These are bigger purchases, and a wrong pick is expensive.

Petrol generator

The DF3600 is listed at 2800W and 212cc. Add up the wattage of everything you will run at the same time, then leave some headroom. Electric motors draw more power at start-up. Fuel use, running time and sockets matter too.

Petrol water pump

The DQGZ50 (Rs. 65,300) and DQGZ80 (Rs. 72,400) both list 4.0kW and 212cc. On the headline numbers they are identical, so look at outlet size, flow rate and lift on the product page.

Pressure washers and sprayer

Most buyers compare pressure first. It is not the only number that counts. The DQW5.5/10 is rated at 100 bar and the commercial DQW8/7 at 70 bar, so the more expensive washer has the lower pressure rating. Check flow rate and the duty each one is built for. The DPWG3.0 sprayer is rated at 3000 PSI, roughly 207 bar.

Dongcheng Power Tool Prices in Pakistan: Three Bands

Prices on this page run from Rs. 7,200 to Rs. 149,000. They fall into three bands.

  1. Under Rs. 10,000: the two 1-inch die grinders and the 4 and 4.5 inch angle grinders.
  2. 13,200 to Rs. 38,300: the larger angle grinders, the sanders, metal shears, wall chaser, 12V angle driver drill and the 100 bar pressure washer.
  3. 65,300 and above: the petrol water pumps, the commercial pressure washer, the generator and the 3000 PSI sprayer.

Ordering Dongcheng Power Tools Online in Pakistan

Ordering takes five steps:

  1. Open the tool’s listing and read the description.
  2. Match the model number and power rating to your job.
  3. Add it to your cart.
  4. Enter your delivery address and phone number.
  5. Pick a payment method and confirm.

Double-check the model number. Several tools share a name and differ only by code, like the two 4 inch grinders (DSM03-100A and DSM04-100B) or the two petrol pumps (DQGZ50 and DQGZ80). For heavy items such as the generator, pumps and washers, confirm delivery and stock with us before you pay.

Frequently Asked Questions

How much do Dongcheng power tools cost in Pakistan?

From Rs. 7,200 for a 1-inch die grinder to Rs. 149,000 for a 3000 PSI high pressure sprayer. Angle grinders run from Rs. 7,250 to Rs. 30,900. Check the product page for the current price.

Should I buy a 4 inch or 6 inch Dongcheng angle grinder?

Four inch for everyday work and easy handling: the DSM03-100A and DSM04-100B are Rs. 7,250 each, the cheapest angle grinders in the range. Six inch for more reach on heavier jobs: the DSM03-150 is Rs. 19,000. Compare the power ratings on the product pages before you decide.

Which Dongcheng rotary hammer is right for drilling concrete?

Start with the hole size you need. The DZC02-20 drills up to 20mm and the DZC02-26 and DZC05-26B up to 26mm. The DZC05-26B also has the higher impact energy, 2.8J against 2.0J.

Are the Dongcheng tools sold here genuine?

Imsons is a Dongcheng dealer. When your order arrives, check that the model number on the box matches the one you ordered.

Can I run the 110V-DSM150A on normal Pakistani supply?

Not by plugging it straight into a 220V socket. It is a 110V model and supply here is generally 220 to 240V, so talk to us before you order.

Why does the DQW8/7 cost more when its pressure is lower?

Pressure is only one number. The DQW8/7 is the commercial washer at 70 bar (Rs. 95,400), against the DQW5.5/10 at 100 bar (Rs. 36,900). Flow rate and the duty each is built for matter too. Tell us the job and we will point you to the right one.